While using MIP, MinIP and MPVR calculations, only one pixel is shown for the whole thickness of the slice. The user should know that only selective data is shown based on these calculations, and that it is his responsibility to double check the data with the original series.

Internal company reference: DRR001

The accuracy of MPR generated images depends on the quality of the original series (pixel spacing, slice thickness ...). The images are calculated, based on the data available in the original series. Gaps of pixel- data will be calculated to show a smooth image.

It will remain the user's responsibility to keep in mind the slice thickness and pixel spacing from the original series. In case the slice thickness is larger than the pixel spacing, overlap between slices is not taken into account. The used pixel spacing is calculated based on the image location of the original images.

The user should be aware of lossy data visualization while judging and diagnosing a patient. The user should also be aware that series that lost pixel- data while compressing or have an inappropriate slice thickness are not suitable for proper MPR generation.

Internal company reference: DRR002

The Volume Registration will not be 100% correct in every scenario. It is still the users' responsibility to verify the outcome of the tool and make corrections if needed.

Internal company reference: DRR003

The recognized text is not always 100% correct. It is the responsibility of the radiologist to verify the correctness of the report before validation.

Internal company reference: DRR004

Changing study information on DeepUnity PACSonWEB is in most cases merely a temporary solution. The information must be changed in the PACS and RIS system. If not, it may occur that the initial information is synchronized and hereby restored.

Internal company reference: DRR005

AI results might not always be 100% correct. When basing diagnoses or medical decisions on AI results, it is the responsibility for the radiologist to verify the outcome with the original series.

Internal company reference: DRR006